When to Use Electric Circuit TracersThere are different circumstances when you have to locate electrical circuits and wires in your walls. This could be when you need to find a fault or when you undertake some kind of home renovation. Advanced electrical wiring locators and circuit tracers are available today that can help you find the wires and circuit in the walls. These devices can also help you locate ground lines, feeders, control wiring, neutrals and branch circuits.

  • Dependable and quick way

The electrical circuit tracer is the best, quick, safe and dependable way to find the wiring that defines the circuit. If you get an advanced electrical circuit tracer, then they are very easy to use. You can use them out of the box right away. They come with two components – you can plug one unit into the receptacle and run the other one, which is a probe to find the individual circuit breaker. The tracing unit comes with other accessories including a signal generator.

  • Uses of a tracer

Tracing the electric circuit with a good tracer is very quick and virtually error free. It is no longer time-consuming and error-ridden, as it was a few years ago. This device can help you trace wires in ceilings, walls, cable trays, raceways and even underground. The electric tracers can also be used to locate insulation leakage. The tracer can help you pinpoint exactly where the cable has a leakage. They can also be used to locate shorts and dead circuits, if any.

  • Follow instructions

It is, however, important to tune your circuit tracer properly so that they function optimally. Follow the instructions on the electrical circuit accurately and appropriately clip on your transmitter to the circuit breaker. This will help you get the signals correctly and give you error free messages. Today, advanced devices can help you trace live and open circuits in a matter of minutes.

Make sure that you get the right type of electrical circuit tracer to suit your requirements.

Checking the Wiring of House for SafetyThere are several problems that may result from excess moisture in your home. Whether it’s the product of bad insulation, recent flooding, leaks, or high humidity, moisture is bad news for your family’s health, pets, furniture, and electronics.

Mold and mildew thrive in moist environments, causing health problems especially for those who suffer from allergies and respiratory concerns. Moisture may damage electronics such as appliances. Your furniture may suffer from marks left by mold and mildew or water.

To prevent these problems, here are some steps you should take.

Check Your Insulation

Insulation that works will limit moisture problems. Your windows and doors should be fixed or replaced if they allow drafts in. If there are stains on your ceiling, chances are you have a leaky roof. Check the attic for mold. If there are shafts of light coming in, you’ve found the problem. Your ventilation may need checking as well. Check the basement for dampness.

Tape a piece of clear plastic on the wall. If there is moisture in the plastic sheet after a while, you know your wall isn’t insulated well. You may need to replace your siding. Once your home’s insulation is fixed, your moisture problems may be over.

Check Your Wiring

If your appliances are getting damaged one after the other, excess moisture may have affected them or your home’s wiring. This is particularly dangerous because it may start a fire. First, make sure it’s not your outlets that are causing the problem. Use branch circuit testing equipment to check the voltage from your outlets. Sometimes, plugging in different appliances in one outlet causes the electricity to fluctuate or become inconsistent, leading to issues. If this is not the reason, you may want to hire an electrician to check the wiring, which may have been affected by moisture or other causes.

Use a Dehumidifier

If the humidity in your area is too high, it may be time to use a dehumidifier to bring the humidity levels down to a healthy level inside your home, which means about 30 to 50 percent. Beware, however, of bringing the humidity too low, as this may also cause other health concerns.

In Case of Flooding

Flooding will definitely leave moisture in your home even when everything seems dry. To remove the remaining excess moisture, call a professional mold and flood cleanup company. They have the equipment and experience to remove moisture and mold where you might not think to look. Call an electrician to make sure you're safe from electricity risks and problems.

Excess moisture is responsible for many health and home problems. Be vigilant in protecting your home from it. The longer you neglect it, the more issues it may cause.